2 Lower Cabinets with 2 Doors and 1 Shelf
- Dimension: H:800 x W:620 Central Locking Lower Cabinet with Drawers
- Dimension: H:800 x W:620 x D:530 mm
- 7 drawers
- Central locking system
- 1 Lower Cabinet with 2 Doors and 1 Waste Lid
- Dimension: H:800 x W:620 x D:530 mm
- 2 doors
- 1 section with waste cover
- 2 Sliding / Top Opening Door Cabinet
- Dimension: H: 370 x W: 619 x D: 310 mm
- 1 Perforated Panel System with Socket
- Dimension: H: 741 x W: 619 x D:17 mm
- 4 covered 220 V grounded sockets
- IP44 protection class
- 1 Flat Perforated Panel System
- Dimension: H:741 x W:619 x D:17 mm
- 1 Lighting Connection and Under-Upper Cabinet Eyebrow
- Dimension: H: 50 x W: 1240 mm
- 30 mm raw MDF
- Galvanized steel coating
- 1 LED Lighting
- 900 mm LED fixture
- With On/Off switch
- 16 Metal Ball Joint Feet
- Dimension: H: 50 x W: 65 mm
This package structure; It combines active workspace, drawer tool management, covered storage, waste collection, hand tool organization, electrical access and work lighting in an integrated professional system.
Modular and Flexible Workbench Design
One of the main advantages of the HÇ16.20.12 model is its modular structure. The equipment, working methods and operational needs used in factories and workshops may change over time. The modular system supports easier adaptation of the work area to these changes.
The modular structure of HÇ16.20.12:
- Enables the use of different cabinet types in the same system.
- Offers different storage options for small and large equipment.
- Supports the organization of the work area according to the type of operation.
- Allows the panel system to be organized according to the hand tools used.
- Module in line with technical suitability. It facilitates the re-planning of the layout.
- It can be adapted to different maintenance, installation and technical service needs.
- It helps to create high storage capacity on the compact work surface.
These features make Haksan HÇ16.20.12 not just a desk, but a professional workstation that combines different functions in the same structure.
1240 mm Wide Working Table
The HÇ16.20.12 package includes a work table with dimensions of H: 30 x W: 1240 x D: 550 mm.
1240 mm wide working area:
- Can be used for maintenance operations.
- Supports small and medium-sized assembly work.
- Creates a functional surface for technical service operations.
- Parts preparation and control operations.
- Facilitates the establishment of a professional workstation in limited spaces.
- Helps to position hand tools and workpieces regularly.
The compact work table provides an advantage, especially for businesses where high storage capacity is needed but working space is limited.
30 mm Raw MDF and Galvanized Steel Coated Work Surface
HÇ16.20.12 work table:
- 30 mm raw MDF
- It has a galvanized steel coating
structure.
Galvanized steel coated working surface:
- Creates an industrial appearance suitable for professional workshop environments.
- Provides a functional surface for operations performed with technical equipment.
- Helps facilitate daily cleaning operations.
- Maintenance, installation and technical service work. supports.
- It brings the MDF core together with the metal coating.
Additional protection measures should be used on the work surface depending on the nature of the operation to be performed.
7-Drawer Central Locking Lower Cabinet
The package includes one central locking lower cabinet with 7 drawers measuring H:800 x W:620 x D:530 mm.
This drawer structure allows small and medium-sized sets and parts to be stored separately. It helps to store items in sections.
In drawers:
- Screwdrivers
- Pliers and side cutters
- Wrench sets
- Hexagon sets
- Measurement equipment
- Screws and nuts
- Fasteners
- Small spare parts
- Electrical equipment
- Technical consumables products
can be classified.
Seven separate drawers support creating specific areas for different tool categories and reducing tool chaos in the work area.
Controlled Tool Storage with Central Locking System
The central locking system in the 7-drawer base cabinet helps manage access to tools and technical equipment in a more controlled manner.
Central locking system:
- Supports limiting unauthorized access to drawers.
- Ensures that the tools are kept closed at the end of the working day.
- Creates a controlled storage area for sensitive measurement tools.
- Can be adapted to user or department-based tool management.
- Can support tool delivery and control systems.
- Contributes to the orderly storage of equipment.
The lock system does not provide absolute security guarantee; It is an auxiliary feature that supports professional team management.
2 Lower Cabinets with Doors and Shelves
The HÇ16.20.12 package includes two lower cabinets with dimensions of H:800 x W:620 In the cabinets:
- Power tools
- Tool bags
- Major maintenance equipment
- Technical devices
- Cable and connection products
- Large spare parts
- Packaged consumables
- Protective equipment
can be arranged.
One shelf helps to place the equipment more orderly by allowing the internal volume of the cabinet to be used at two different levels.
Combined Use of Storage with Covers and Drawers
HÇ16.20.12 allows the use of different storage solutions instead of keeping materials of different sizes in the same type of cabinet.
In the system:
- Small hand tools in drawers,
- Sensitive equipment in the central locked section,
- Vulum electric tools in the closed bottom. in the cabinets,
- Frequently used tools can be arranged on the pegboard,
- Spare and consumable products can be arranged in the upper cabinets
.
This structure helps to reduce unnecessary material density on the work surface.
Lower Cabinet with Waste Cover
The package includes one lower cabinet with dimensions of H:800 x W:620 x D:530 mm, 2 doors and 1 bottom with waste cover. There is a cupboard.
Trash covered section:
- Helps collect suitable general waste generated during work at a certain point.
- Supports the removal of packaging and daily consumable waste from the work table.
- Contributes to a more tidy appearance of the workstation.
- It can facilitate daily cleaning processes.
Wastes that are hazardous, chemical or subject to special disposal procedures are in the standard garbage section. should not be stored.
2 Top Cabinets with 2 Shelves
The HÇ16.20.12 package includes two top cabinets with 2 doors and 2 shelves, measuring H: 1144 x W: 620 x D: 530 mm.
The use of two top cabinets creates a high vertical storage capacity despite the compact work table.
Top in the cabinets:
- Consumables
- Spare parts
- Technical catalogs
- User manuals
- Less frequently used tools
- Packaged equipment
- Auxiliary work materials
can be organized.
Two shelves in each cabinet make it easy to classify materials at different levels.
Vertical Space-Efficient Storage System
Placing cabinets only on the floor area in workshops can narrow the work area. HÇ16.20.12's upper cabinet system helps utilize available vertical space for storage purposes.
This structure:
- Provides additional storage capacity without increasing floor space.
- It makes it easier to store equipment that is not used frequently in the upper sections.
- It contributes to keeping the work table more organized.
- It supports the removal of consumables and spare products from sight.
- It gives a more professional appearance to the workstation.
2 Pieces of Sliding / Opening Door Cabinet
Two H:370 x W:619 x D:310 in the package. There is a sliding / top opening door cabinet in mm dimensions.
These cabinets:
- Allow daily used equipment to be kept close to the work table.
- Creates additional storage for small and medium volume materials.
- Supports the use of the upper part of the work area.
- Reduces the material density on the counter surface.
- An integrated superstructure with a perforated panel and LED system.
Hand Tool Organization with Perforated Panel System
HÇ16.20.12 package includes:
- 1 perforated panel with sockets
- 1 flat perforated panel
.
The perforated panel system helps to visibly organize frequently used hand tools by using it with suitable Haksan panel accessories.
Suitable panel. with accessories:
- Screwdrivers
- Pliers and side cutters
- Open wrenches
- Hexagon tools
- Drill bits
- Spray products
- Small hand tools
- Technical auxiliary equipment
can be arranged.
Visual Tool Management
Perforated panel, It supports visual tool management by ensuring that frequently used tools are kept at certain points.
This structure:
- Helps create a fixed position for each tool.
- It can reduce the time to access equipment.
- It supports easier recognition of missing tools.
- It reduces the clutter on the work table.
- It makes it easier to return the tools to the right spot after use.
- Contribution to 5S and similar workplace layout applications.
4 Covered 220 V Grounded Sockets
There are 4 covered 220 V grounded sockets on the perforated panel system. IP44 protection class is specified for the socket group in the product information.
Integrated sockets:
- Provides energy access to power tools directly from the work area.
- Can help reduce the need for external extension cables.
- Supports limiting cable density.
- Provides ease of use in maintenance and installation operations.
- Helps integrate electrical equipment with the bench system.
Electrical connections must be made by qualified and authorized persons. IP44 protection class should be evaluated together with the conditions of the installation and usage environment.
900 mm LED Lighting
There is one 900 mm LED luminaire in the HÇ16.20.12 package. LED luminaire has an On/Off switch.
LED work lighting:
- Supports the visibility of the work table.
- It can facilitate operations with small parts and connections.
- Helps increase visual control in assembly and maintenance applications.
- Contributes to user comfort.
- It can reduce the need for an external table lamp.
Lighting Connection and Under the Upper Cabinet. Eyebrow
The package includes a lighting connection and an eyebrow under the upper cabinet measuring H:50 x W:1240 x D:74 mm.
This piece:
- It helps integrate LED lighting into the working system.
- It completes the structure on the upper part of the counter.
- It creates integrity between the panel, cabinet and lighting systems.
3 Panel / Upper Cabinet Connection Posts
HÇ16.20.12 package includes three panel and upper cabinet connection poles measuring H: 1590 x W: 75 x D: 30 mm.
Connection poles:
- Creates a carrier structure for the perforated panel system.
- Supports the integration of the upper cabinets with the workbench.
- Helps position the lighting component.
- Contributes to the integrity of the modular superstructure.
16 Pieces of Metal Ball Joint Feet
A total of 16 pieces of H:50 x W:65 mm metal in the package. There are ball joint feet.
Metal ball joint feet:
- Supports the balanced positioning of the sub-modules on the ground.
- Can help adjust small ground level differences.
- Facilitates the alignment of modules at the same level.
- Contributes to the overall stability of the working system.
When the installation is completed, the balance of all fixed modules should be checked.
High in Compact Working Area. Storage Capacity
HÇ16.20.12 offers many storage modules around the 1240 mm work table.
In the system:
- 2 lower cabinets with doors
- 1 lower cabinet with 7 drawers
- 1 lower cabinet with waste cover
- 2 large upper cabinets
- 2 openings to the top cabinet
is available.
This combination creates a high storage capacity for different equipment and consumables around the limited work surface.
HÇ16.20.12 offers a functional solution, especially in cases where space in the workshop needs to be used efficiently.
Use in Factories
HÇ16.20.12 Modular Workbench can be used in different technical departments of factories.
Main use. areas:
- Maintenance-repair stations
- Machine maintenance sections
- Production support areas
- Assembly stations
- Technical service points
- Mold maintenance areas
- Quality control sections
- Tool preparation points
The combination of a compact work table and large storage capacity helps to create an efficient technical station in limited areas.
Use in Maintenance-Repair Workshops
Different sizes of tools and technical equipment can be used in maintenance operations.
HÇ16.20.12:
- Small hand tools in drawers with central locking,
- Larger equipment in closed cabinets,
- Frequently used tools on perforated panels,
- Consumable products on top. It supports
organization in cabinets.
This structure can help maintenance personnel reach the equipment they need in a more systematic way.
Use in Technical Services
High storage capacity on a limited surface in technical service areas can provide a significant advantage.
HÇ16.20.12:
- Classification of repair kits,
- Arrangement of spare parts,
- Technical service areas. It supports storing devices in closed cabinets,
- Accessing electric vehicles through integrated sockets,
- Illuminating the work surface with LED.
Use in Assembly Areas
1240 mm work table can be used for small and medium-sized assembly applications.
In the lower cabinet with 7 drawers:
- Screw
- Nut
- Washers
- Fasteners
- Small assembly parts
- Measurement equipment
can be arranged in separate sections.
The pegboard system helps keep frequently used tools visible during assembly.
Use in Automotive Services
HÇ16.20.12 as a compact working unit in automotive maintenance and technical service stations.
In drawers and cabinets:
- Wrench sets
- Screwdrivers
- Pliers types
- Measuring devices
- Small service parts
- Power tools
- Consumables
can be organized.
Metal Processing and Machine Maintenance. It is important to separate the areas according to the type of use of different equipment in metalworking and machine maintenance environments.
